Available configuration parameters (data type is 2 Byte DEC):

  • default value 65535
  • 65535 – input I2 does not influence on the heat/ cool process
  • From 0 to 990 – Temperature set point from 0.0 °C to 99.0 °C. When I2 is pressed, it is automatically set temperature setpoint according to value defined here. In this case function of condense sensor is disabled
  • From 1001 to 1150 – Temperature set point from -0.1 °C to -15.0 °C When I2 is pressed, it is automatically set temperature setpoint according to value defined here. In this case function of condense sensor is disabled
  • 2000 – Input I2 influences on the cooling valve according to status of condense sensor, In this case function of setpoint selection with I2 is disabled