HURTIG LEVERING

LEVERING 1-3 DAGE.

ALTID NYE pRODUKTER !

Vi leverer altid enheder med den sidste nye Firmware/Software.

Altid nyeste varer på lager.

BRUG FOR HJÆLP ?

Mads Lund  Tlf. +4520275925

Poul Sørensen Tlf. +4523432758

[email protected]

Youcontrol.dk
Besøgende online :63
Facebook
Powered by Magento extensions
YouTube
Powered by Magento extensions

Z-Wave Plus - Qubino Flush 2 relay Plus 2 x 0,92 kW ZMNHBD1-S

Vær den første til at bedømme dette produkt

Lagerstatus: På lager/fjernlager = 3 vare(r)

Pris: 469,00 DKK

Specialpris Ekskl. moms: 359,20 DKK Inkl. moms: 449,00 DKK

Hurtigt overblik

Z-Wave Plus - Qubino Flush 2 relay Plus 2 x 0,92 kW GOAEZMNHBD1
* Med pris garanti

Z-Wave Plus - Qubino Flush 2 relay Plus  2 x 0,92 kW  ZMNHBD1-S

Flere visninger

Virker Med : 

 
  • Home Center Lite ( JA )
  • Home Center 2 ( JA )
  • HomeSeer ( JA )
  • HOMEY ( JA )  Se mere her 
    • input 1 and 2 can not be used in Flows
    • power consumption for multichannel nodes not reporting
    • on/off state for multichannel nodes not reporting
  • NEXA ( ? )
  • Razberry ( JA )
  • Vera ( JA )       
  • Zipabox ( JA ) Energimåling vises ikke 
  • ZNet Lite V1/V2 ( JA ) 
  • HG2 ( JA )
  • HOMEE-0002 ( JA )
  • Smartthings ( ? ) 
  • Openhab ( ? ) 
  • Indigo ( ? ) 
  • Domoticz ( ? ) 

 

Med denne micomodule Z-Wave switch, kan du tænde og slukke to elektriske apparater, såsom lys, en stikkontakt, ovn, vaskemaskine, en elektrisk varmelegeme, eller endda en garageport (i puls mode), etc .. Dette box fra dit hjem automatisering, men også gennem en lokal switch! Det er muligt at tilslutte en afbryder for hvert luftfartøj fløjet.

Dette modul er også miljøvenligt: dens eget energiforbrug er mindre end 0,4 W og måler løbende den øjeblikkelige energiforbrug (i watt) og det samlede forbrug (kWh) i ovnens pilot. Forbruger-enheder kan således hentes fra en boks automation-kompatibel, så du derefter at være på vagt i forhold til dit energiforbrug.

Men det er ikke alt, da dette modul har også en indgang til tilslutning af en temperaturføler, hvilket gør det meget effektivt at styre et system til opvarmning, ventilation eller klimaanlæg for eksempel.

Endelig bemærkes det, at QUBINO mærke har sat obligation kvalitet og holdbarhed, de har så nøje udvalgt ydeevne komponenter såsom relæ OMRON. Mange kvalitet kontrolprøver blev også udført på modulet for at sikre maksimal holdbarhed (stærk nok til at fungere i temperaturer fra -10 ° C til 40 ° C).

Dens gennemførelse er meget enkel, takket være en lille størrelse, og evnen til at bruge nogen form for levering (AC eller DC).

FUNKTIONER:

  • Bestil to lys / apparater eksternt
  • Flyttet bag en eksisterende kontakt
  • ON / OFF-funktion
  • Den mindste enhed 2 udgange i verden
  • Case design specielt designet til nem installation (let fastsættelse kabler), testet af professionelle elektrikere
  • Meget lavt strømforbrug mindre end 0,4 W
  • Driftstemperatur -10 til 40 ° C
  • Stik til analog temperaturføler
  • Måling af strømforbrug
  • 1 binær indgang gør det muligt at tilslutte en ekstra enhed, såsom en sensor eller en bistabile trykknapper, osv ..

SPECIFIKATIONER:

  • Strømforsyning: 110-230 VAC ± 10% 50 / 60Hz, 24-30VDC
  • Effektforbrug: 0,4 W
  • AC nominel udgangsstrøm (resistiv belastning): 2 x 4A / 230VAC
  • Nominel DC udgangsstrøm (resistiv belastning): 2 x 4A / 30VDC
  • Effekt AC kredsløb (resistiv belastning): 2 X 920W (230VAC)
  • Power kredsløb DC-udgang (ohmsk belastning): 2 X 96W (24VDC)
  • Målenøjagtighed for energi: P = 0-200W + / 2W; P> 200W + / -3%
  • Overførsel radiofrekvens: 868.42MHz, Z-Wave
  • Rækkevidde: op til 30 m indendørs (afhængigt af omgivende materialer)
  • Måleområde af digital temperaturføler (sensor sælges separat): -50 ~ 125 ° C
  • Driftstemperatur: -10 ~ 40 ° C
  • Plads til installation: Ø ≥ 60mm
  • Mål (B x H x D): 41,8 x 36,8 x 16,9 mm
  • Vægt: 25 g
  • Certificeringer: CE, RoHS
Primær Controller Kompatibilitet
Vera Lite fuld kompatibel
Vera Edge Ikke Testet
Vera 3 fuld kompatibel
Zipabox / Zipamini fuld kompatibel
Domoticz ingen testet
Indigo ingen testet
eeDomus + fuld kompatibel
Piper / Piper NV (v.1.7.1) fuld kompatibel
jeedom fuld kompatibel
Zibase fuld kompatibel
Fibaro Home Center 2 v4.056 Fuld Kompatibel
Fibaro Home Center Lite v v.4.056 partiel (On / Off kun)


Flush 2 Relays

This module is used for switching On or Off 2 electrical devices like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc…

 

Power Monitoring

The Relay monitors the power being used by your appliance and reports actual power (Watts) and total consumption (kWh) - helping you control and reduce your energy bills.

Temperature Sensor

Using an optional temperature sensor, the Qubino Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

Z-Wave-Plus_on-white-300x241

 
 
 
 
 

Electrical diagrams

Electrical diagram 230VAC
N      Neutral lead
L      Live lead
Q1   Output for electrical device no. 1
Q2  Output for electrical device no. 2
I2    Input for switch to control electrical device no.2
I1    Input for switch to control electrical device no.1
TS  Terminal for digital temperature sensor (only for Flush 2 relays module compatible digital temperature sensor, which must be ordered separately).
 
 
 
 
 
 
 
 
Electrical diagram 24VDC
N     + VDC
L      - VDC
Q1    Output for electrical device no. 1
Q2   Output for electrical device no. 2
I2     Input for switch to control electrical device no.2
I1     Input for switch to control electrical device no.1
TS   Terminal for digital temperature sensor (only for Flush 2 relays module compatible digital temperature sensor, which must be ordered separately).


 

  • Power supply: 110 - 230 VAC ±10% 50/60Hz, 24-30VDC
  • Rated load current of AC output (resistive load)*: 2 X 4A / 230VAC
  • Rated load current of DC output (resistive load): 2 X 4A / 30VDC
  • Output circuit power of AC output (resistive load): 2 X 920W (230VAC)
  • Output circuit power of DC output (resistive load) 2 X 96W (24VDC)
  • Power measurement accuracy: P=0-200W, +/-2W P>200W, +/-3%
  • Frequency Range 868.42MHz, Z-Wave
  • Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125°C
  • Operation temperature: -10 ~ 40°C
  • Range: up to 30 m indoors (depending on building materials)
  • Dimensions (W x H x D): 41,8x36,8x16,9mm
  • Weight: 25g
  • Power consumption: 0,4W
  • For installation in boxes Ø ≥ 60mm or 2M


Setting Parameters

 
 
 

Parameter no. 1 & no. 2 – Input I1 & Input I2 switch type

 

Available configuration parameters (data type is 1 Byte DEC):

  • default value 1
  • 0 - mono-stable switch type (push button)
  • 1 - bi-stable switch type
 
 
 
 
 

Flush-2-relays-NEW-Q1-and-Q2

Parameter no. 11 & no. 13 - Automatic turning off output Q1 & Q2 after set time

TVs, Hi-Fi systems and other home appliances have already integrated automatic turn off functionality, this module also offers this functionality. Automatic turning off function allows energy saving, without doing scenes on Z-Wave controller.

This function, for example also allows automatic re-locking door after defined time.

When relay Q1 or Q2 is ON it goes automatically OFF after time defined by this parameter. Timer is reset to zero each time the module receive ON command regardless from where it comes (push button, associated module, gateway,..).

Available configuration parameters (data type is 2 Byte DEC):

  • Default value 0
  • 0 - Auto OFF disabled
  • 1 – 32535 = 1second (0,01s) – 32535 seconds (325,35s) Auto OFF enabled with define time, step is 1s or 10ms according to parameter nr.15
 
 
 
 
 

Parameter no. 12 & no. 14 - Automatic turning on output Q1 & Q2 after set time

When relay Q1 or Q2 is OFF it goes automatically ON after time defined by this parameter. Timer is reset to zero each time the module receive OFF command regardless from where it comes (push button, associated module, gateway,..).

Available configuration parameters (data type is 2 Byte DEC):

  • Default value 0
  • 0 - Auto ON disabled
  • 1 – 32535 = 1second (0,01s) – 32536 seconds (325,35s) Auto ON enabled with define time, step is 1s or 10ms according to parameter nr.15
 
 
 
 
 

Parameter no. 15 - Automatic turning off / on seconds or milliseconds selection

Available configuration parameters (data type is 1 Byte DEC):

  • Default value 0
  • 0 – seconds selected
  • 1 – milliseconds selected

Note: this parameter is valid for both outputs Q1, Q2 and is the same for turning off or on.

 
 
 
 
 

Flush-2-relays-NEW-Q1-and-Q2

Parameter no. 30 - Saving the state of the relay after a power failure

Available configuration parameters (data type is 1 Byte DEC):

  • default value 0
  • 0 – Flush 1 relay module saves its state before power failure (it returns to the last position saved before a power failure)
  • 1 - Flush 1 relay module does not save the state after a power failure, it returns to "off" position.
 
 
 
 
 

Flush-2-relays-NEW-Q1-and-Q2

Parameter no. 40 & no. 41– Power reporting in Watts on power change for Q1 or Q2

Set value means percentage, set value from 0 – 100 = 0% - 100%. Available configuration parameters (data type is 1 Byte DEC):

  • default value 10
  • 0 – Reporting Disabled
  • 1 – 100 = 1% - 100% Reporting enabled. Power report is send (push) only when actual power in Watts in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%.

Note: if power changed is less than 1W, the report is not send (pushed), independent of percentage set.

 
 
 
 
 

Flush-2-relays-NEW-Q1-and-Q2

Parameter no. 42 & no. 43– Power reporting in Watts by time interval for Q1 or Q2

Set value means time interval (0 – 32535) in seconds, when power report is send. Available configuration parameters (data type is 2 Byte DEC):

  • default value 300 (power report in Watts is send each 300s)
  • 0 – Reporting Disabled
  • 1 – 32535 = 1 second – 32535 seconds. Reporting enabled, Power report is send with time interval set by entered value.
 
 
 
 
 
 
 

Some valves are normally opened (NO), some are normally closed (NC).
NO - if the power is off, the valve is open
NC - if the power is off, the valve is closed

 

Flush-2-relays-NEW-Q1-and-Q2

Parameter no. 63 & no. 64 – Output Q1 & Output Q2 Switch selection

Set value means the type of the device that is connected to the PWM output. The device type can be normally open (NO) or normally close (NC). Available configuration parameters (data type is 1 Byte DEC):

  • default value 0
  • 0 - When system is turned off the output is 0V (NC).
  • 1 - When system is turned off the output is 230V (NO).
 
 
 
 

Temperature Sensor Setting

 
 
 
 
 

Parameter no. 110 – Temperature sensor offset settings

 

If the temperature sensor is connected to the module, the temperature sensor widget is shown automatically in UI (user interface).

If the measured temperature with an additional temperature measuring device is different from the one measured by the connected digital temperature sensor, the temperature can be compensated by this parameter.

Available configuration parameters (data type is 2 Byte DEC):

  • default value 32536
  • 32536 – offset is 0.0C
  • From 1 to 1000 – value from 0.1 °C to 10.0 °C is added to actual measured temperature.
 
 
 
 
 

Parameter no. 120 – Digital temperature sensor reporting

 

If digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter. Available configuration para meters (data type is 1 Byte DEC):

  • Default value 5 (Temperature is reported on 0,5°C change)
  • 0 – Reporting disabled
  • 1- 127 = 0,1°C – 12,7°C, step is 0,1°C


Kære internetbruger, vi takker for at du kiggede forbi på vores side.

 

* Kære internetbruger, finder Du same produkt billigere andre steder i DK så Matcher vi prisen.

Producent Qubino
Farve Blå
Dimensioner (W x H x D): 41,8x36,8x16,9mm
Vægt 0.2000
EU regulations EN55022(radiobølge interferens), EN61000-6 (sikkerheden ved brug)
Udgang output (resistive load): 2x920W (230VAC) - 2 X 96W (24VDC)
Forsyningsspænding Power supply: 110 - 230 VAC ±10% 50/60Hz, 24-30VDC
Max strømbelastning Rated load current of AC output (resistive load)*: 2 X 4A / 230VAC - 2 X 4A / 30VDC
Overophedning beskyttelse 105°C
Måleområde Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125°C
Radiofrekvens 868.42MHz
Radio-protokol: Z-Wave
Elforbrug < 0,4W
Arbejds temperatur 10°C - 40°C
Rækkevidde Udendørs ca 50meter, indendørs op til 30meter
Datablad

Datablad

Strømforbrug (standby) 0,4W

Indsend din bedømmelse

Kun registrerede brugere kan skrive bedømmelser. Log ind eller registrer