Vi leverer altid enheder med den sidste nye Firmware/Software.

Altid nyeste varer på lager.


Mads Lund  Tlf. +4520275925

Poul Sørensen Tlf. +4523432758

[email protected]
Besøgende online :38
Powered by Magento extensions
Powered by Magento extensions

Z-Wave Plus - Z-Wave Coupler ZHC5002 + GIRA front Model 2003100

Vær den første til at bedømme dette produkt

Lagerstatus: På lager/fjernlager = 4 vare(r)

Ekskl. moms: 959,20 DKK Inkl. moms: 1.199,00 DKK

Hurtigt overblik

Z-Wave Plus -Z-Wave Plus - Z-Wave Coupler ZHC5002 and GIRA front Model 2003100

Z-Wave Plus -  Z-Wave Coupler ZHC5002 + GIRA front Model 2003100

Flere visninger

Virker Med : 


User manual ZHC5002

Datasheet ZHC5002


The ZHC5002 module, together with a GIRA pushbutton module, is a Z-Wave wall switch device that can both control other Z-Wave devices and activate scenes.


The Z-Wave insert is designed for interfacing a GIRA push button sensor module (GIRA push button sensor 2, type 2003 100), that contains two 10 pole connectors, to a Z-Wave network.


Although it is controlling other devices, ZHC5002 cannot act as a network controller and therefore always need a Z-Wave network controller to add and remove devices, as well as maintaing associations.


The device can work in different modes and with different functionality, which can be selected by means of various configuration parameters.


  • Control of groups of other Z-Wave devices using 'ON', 'OFF' and 'DIM' commands.
  • Activation of scenes in Gateways or other Z-Wave devices (Central Scene).
  • The LEDs can be controlled in a numbers of ways.


ZHC5002 contains a relay output that allows the module to control a local load. The relay is controllable by means of the modules different buttons or by other Z-Wave devices.


ZHC5002 can act as a Scene Controller by transmitting different Scene Notifications, when the buttons are pressed, long-pressed and double-pressed.


The ZHC5002 insert is constructed to fit into standard EURO wall boxes (60 mm).




 Built-in relay for control of a local load, i.e. a lamp socket via the existing interconnect wire and thereby replacing a standard 1-pole switch.

 Uses standard GIRA pushbutton modules with different designs and colours (type 2003 xxx).

 Based on Z-Wave Plus, 500-series platform for increased Z-Wave network coverage.

 The module contains an isolated power supply, so there is no risk for electrical shocks when mounting or replacing the GIRA module.

 All six LEDs are individually controlled and their functionality is configurable by means of Z-Wave configuration parameters.

 The firmware contains Multi-Channel Command Class for a better visualisation- and more logical control in the Z-Wave Home Controller.

 ZHC5002 will act as a Z-Wave network repeater to increase reliability of the network.

 The firmware in ZHC5002 is able to be updated by the end-user through the Z-Wave network (OTA firmware update).

 Low standby consumption (<0.3 W).

 The firmware contains Central Scene Command Class for easy scene launching in the Z-Wave Home Controller



Producent Logic Soft
Farve Hvid
Dimensioner H 70 mm x W 70 mm x D 27 mm
Vægt 0.0052
Strømforbrug 0,6W / 0,3W standby
Forsyningsspænding 230V AC, 50Hz
Radiofrekvens Z-Wave: 868.4MHz – 500 Series
Radio-protokol: Radio protocol Z-Wave®: 868.4MHz – 500 Series – Compliant Z-Wave Plus® SDK 06.51.06

User manual ZHC5002

Rækkevidde Op til : 80 meter udendørs / 40 meter indendørs

Datasheet ZHC5002

Maks Udgangseffekt Max 1000 W resistive load, or up to 150 W inductive load.
Strømforbrug (standby) 0,3W
Overspændingsbeskyttelse: Fuse 5A Slow (soldered)

Indsend din bedømmelse

Kun registrerede brugere kan skrive bedømmelser. Log ind eller registrer