Vi leverer altid enheder med den sidste nye Firmware/Software.

Altid nyeste varer på lager.


Mads Lund  Tlf. +4520275925

Poul Sørensen Tlf. +4523432758

[email protected]
Besøgende online :64
Presence recognition in Fibaro Home Center via Mother Sense Cookie
How to make FIBARO Home Center 2 Gateway
Fibaro RGBW in a pendent light or the Wofi LED Ring for modern living
Using Z-Weather in the Fibaro HomeCenter 2
FIBARO: Heating off when window open – How to save real cash
Easy LUA scripts part 3: How to change the FIBARO Wallplug´s color
netatmo welcome – read the presence-status with the Fibaro HomeCenter 2
This is how you set up the Fibaro Video-Gate as Door intercom #Tutorial
Fibaro Shortcuts: This is how your underfloor heating is going to be smart as well!
This is how you set up a heating schedule in the Fibaro Home Center
To check the Fibaro Presence via iPhone, Smartphone or TV
Sådan at aktivere din alarm med RFID-tag-læser
How to customize your FIBARO app?
FIBARO mobile app How to install the widgets
Fibaro & HomeKit - SmartHome stemmestyring med Siri nemt!
Sådan sender du SMS med Fibaro Home Center
IFFTT Fibaro
Filling the Weather Display of the HomeCenter 2 with your own Values
Using Z-Weather in the Zipabox
atom homey
Powered by Magento extensions
Powered by Magento extensions

Z-wave Plus - Aeotec LED Strip 2.4 AEOEZW121-2

Vær den første til at bedømme dette produkt

Lagerstatus: På lager/fjernlager = 3 vare(r)

Ekskl. moms: 527,20 DKK Inkl. moms: 659,00 DKK

Hurtigt overblik

Z-wave Plus - Aeotec LED Strip 2.4 AEOEZW121-2

Z-wave Plus - Aeotec LED Strip 2.4  AEOEZW121-2

Flere visninger

 Compatibility list

Z-Wave Controller Controller Revision Article Revision Compatibility status Comment
FIB_HOMEC2 4.530 1.2  partly compatible no color selection possible, warm white cannot be used independently
FIB_FGHCL 4.530 1.2  partly compatible no color selection possible, warm white cannot be used independently
POPE011801 2.3.8 1.2  fully compatible  
POPEHOME 040126 1.2  partly compatible no color selection possible, warm white cannot be used independently
ZMEEUZBWAY 2.3.8 1.2  fully compatible  
MCVEVERA_PLUS 1.7.4001 1.2  fully compatible
ZMEEUZBWD 2.3.8 1.2  fully compatible  
ZMEERAZ2 2.3.8 1.2  fully compatible  
ZMEEUZB1 2.3.8 1.2  fully compatible  
ZIPEMICRO 1.3.13 1.2  fully compatible  
ZIPETILEZIG-B 1.3.13e 1.2  fully compatible  
ZIPETILEZIG-W 1.3.13e 1.2  fully compatible  

Virker Med :


  • Home Center Lite ( Nej )
  • Home Center 2 ( Nej )
  • HomeSeer ( ? )
  • HOMEY ( JA )
  • NEXA ( ? )
  • Razberry ( JA )
  • Vera ( ? )
  • Zipabox ( JA )
  • ZNet Lite V1/V2 ( ? )
  • HG2 ( ? )

Product information "Aeotec LED Strip 2.4"

NOTE: This product is the follow-up product of the AEOEZW121 and replaces this product as of now. The only difference in the features is the length of the LED Strip.

Paint your home in new light and choose from more than 16 million colors the perfect shade that meets your mood. Your home is no longer decorated with just furniture and and photos – use the power of light.

The LED Strip by Aeotec is the first ready-to-use Z-Wave LED Strip for Smart Homes. After mains connection, it can be included to a Z-Wave network.

Switch the LED Strip via wireless switch, smartphone or sensor controlled and change the shade of a color anytime from anywhere.

The Aeotec LED Strip has separate warm white, cold white and color LEDs which has a higher quality than ordinary LED stripes.Furthermore, the Aeotec LED Strip is not only dedicated to your home four walls, it is also suitable to illuminate your balcony, terrace and garden, because it can be used indoors and outdoors as well.


  • RGBW LED Strip with integrated radio module
  • Various shades of white from warm to cold
  • 16 million colors selectable
  • Brightness: 5,000 lm (1,000 lm/m)
  • Infinitely dimmable from 1…100% 
  • 2.4 m long, only 3 mm thick (cuttable)
  • High-quality white and color LEDs
  • Also for outdoor use (-20…40°C; IP65)
  • Power Supply: 72 W max. brightness; Standby: 1.2 W
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 10 x 3 x 2400 mm

Scope of Delivery:

  • LED Strip
  • Z-Wave module
  • Power adapter
  • Mounting material
  • Quick start guide





Install your LED Strip.


The installation of your LED Strip has two major steps: the LED Strip Controller and the LED Strip. LED Strip can be installed inside or outside your home, but the LED Strip Controller should only be installed inside your home and should not be installed outdoors in elements such as rain and snow.



Tools you need.

These will be needed to cut your LED Strip to fit the area that you want.

  • Scissors
  • Measuring Tape


Step 1 - Before you begin, test your LED Strip.

  1. Connect the LED Strip to your LED Strip Controller and plug it in.
  2. Tap the button located on the back of the LED Strip Controller and tap it once to turn it on, and another to turn it off to test the LED Strip.
  3. Disconnect LED Strip from your LED Strip Controller.


Step 2 - Measure your surface and cut to size.

  1. Unroll the LED Strip light from the plastic reel
  2. Measure the surface that you want to place the LED strip to determine where you need to cut the LED Strip, alternatively, you may unroll the LED strip along the surface you will be placing it on if this works best for you.
  3. Cut your LED Strip to size. (NOTE - Make sure to only cut on the line where the segments are connected, they are labeled as VCC, W, R, G, B, C and have a line down the center, these are intended areas that you may cut, do not cut after or before these connections)


Step 3 - Stick the LED Strip on a surface.

  1. Make sure to clean the surface that you are sticking LED Strip to before placing it on.
  2. Make sure that the surface is dry after you have cleaned the surface.
  3. We suggest that you slowly take off the protective tape from one side, then slowly pull it out and ensure that the LED Strip is stuck on the surface straight. Then adjust the angle as you need to in order to avoid possible mistakes.
  4. Apply pressure along the area that you remove the tape until you reach the end.


Step 4 - Connect LED Strip to the LED Strip Controller.


1. Plug the LED strip to the LED strip connector of your LED Strip Controller. 

2. Connect the Power Adapter to your LED Strip.

3. Plug the Adapter into an electrical outlet and then the Network LED on LED Strip Controller will blink slowly to indicate it is ready to be paired to your Z-Wave network. 

4. Now press the Action Button to toggle your LED strip on or off to ensure the connections between your LED Strip and its Controller properly connected.








Quick start.


Adding your LED Strip to a Z-Wave network (insecure pair).


You are now able to manually control the LED Strip directly via pressing your LED Strip’ Action Button. It is time to add your LED Strip to your Z-Wave network. To set your Z-Wave gateway/controller into pairing mode, please refer to the respective section within your controller instruction manual.

1. Set your Z-Wave controller into pairing mode.

2. Press the Action Button once on the LED Strip (The network LED will blink green as an indication it is pairing insecurely, please refer to section "Enabling Security Encryption" in the Advanced Function section to pair it securely).



3. If the LED Strip has been successfully added to your Z-Wave network, its Network LED will become solid. If the pairing was unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient, repeat the instructions above from step 1. 


With your LED Strip now working as a part of your smart home, you’ll be able to configure it to indicate different colors from your home control software via setting the RGB value. Please refer to the user manual for your Z-Wave controller/gateway for precise instructions on configuring your LED Strip to your needs.


Removing your LED Strip from a Z-Wave network.


Your LED Strip can be removed from your Z-Wave network  at any time. You’ll need to use your Z-Wave network’s main controller. To set your Z-Wave controller/gateway into removal mode, please refer to the respective section within your Z-Wave controller instruction manual.

1. Set your Z-Wave controller into device removal mode.

2. Press the Action Button on the LED Strip.

3. If the LED Strip has been successfully removed from your  Z-Wave network, its Network LED will remain colorful gradient. If the removal was unsuccessful, the Network LED will still be solid, repeat the instructions above from step 1.



Advanced functions.

Color Display Cycle Configuration.


Parameter 37 [4 byte] will cycle the color displayed by LED  Strip into different modes:



Color Display Cycle (4 bits):

The Color Display Cycle field can have the following values corresponding to 4 different modes



Color Transition Style (2 bits):

The following values correspond to 2 different transition styles between colors:




Cycle Count (8 bits):

The Cycle Count is used to define the number of repetitions / cycles displayed by your LED Strip in Color Display Cycle before stopping:



Brightness (8 bits):

The Brightness is used to define the brightness of animation displayed by the LED Strip.



Time Base of Color Change Speed (3 bits):

This function would be used when the Color Transition Style is  set to Fade Out/In.



Color Change Speed Level (5 bits)

This function would be used when the Color Transition Style is set to Fade Out/In.




The table above shows a decimal representation of the settings that can be set on parameter 37.

Parameter 39 - Multi Color, Single Color, or Random Mode.

Multi Color Mode

Parameter 39 [4 byte] can be used to set up to 8 colors to cycle between when LED Strip is in Multi Color Mode. Colors transition from Color Index 1-8.



Color Component Id:



If you set the parameter 39 to 305135616 (0x12300000 in  hexadecimal), the color will be changed from Red to Orange 

and then Orange to Yellow circularly (Red-Orange-Yellow).

Single Color Mode

When your Strip is in Single Color Mode and the Fade Out  Fade In transition style, the parameter 39 would be used to set the RGB value.



Random Mode

When your Bulb is in Random Mode, the parameter 39 would be used to set the random seed, then your bulb will automatically generate random colors to be displayed according to the random seed you set.


Enabling Security Encryption.


In order to take full advantage of all functionality the LED Strip, you may want your LED Strip as a secure device that uses secure/encrypted message to communicate in your Z-Wave network. In order to do so, a security enabled controller/gateway is required.

1. Set your Z-Wave controller into pairing mode.

2. Press the Action Button on LED Strip Controller 2 times within 1 second. 

3. If LED Strip has been successfully added to your Z-Wave network, its Network LED will be solid when you turn LED Strip on.



Testing Health Connectivity.


You can determine the health of your LED Strip 6s connectivity to your gateway using a manual button press, hold, and release function which is indicated by the LED color.


1. Press and hold LED Strip 6 Action button

2. Wait until the RGB LED turns into a Purple Color

3. Release LED Strip 6 Action Button


The RGB LED will blink its Purple color while sending ping messages to your gateway, when it has finished, it will blink 1 of 3 colors:


Red = Bad Health

Yellow = Moderate Health

Green = Great Health


Be sure to watch for the blink, as it will only blink once very quickly.


Resetting your LED Strip.


This method is not fully advised unless your gateway has failed, and you do not yet have another gateway to perform a general unpair on Multisensor 6.


1. Press and hold LED Strip Action button

2. Wait until the RGB LED turns into a Green Color, and then release.

3. If your LED Strip has been successfully factory reset from its previous network, the RGB LED will be active with a colorful gradient. When you press the Action Button on LED Strip, its green LED will blink. If the removal was unsuccessful, the green LED will stay solid for a few seconds when you press the Action Button.



Producent Aeotec
Farve Hvid
Vægt 0.2000
Radiofrekvens 868,42 MHz
Radio-protokol: Z-Wave Plus
Rækkevidde Udendørs ca 50meter, indendørs op til 30meter

Indsend din bedømmelse

Kun registrerede brugere kan skrive bedømmelser. Log ind eller registrer